Maintenance, Clutch system – Polaris 2013 600 Switchback User Manual
Page 106
102
MAINTENANCE
Clutch System
Drive Belt Deflection
Measure belt deflection with both
clutches at rest and in their full
neutral position.
Place a straight edge (1) on the
belt and apply downward pressure
while measuring at point 2. This
measurement should be 1 1/4
inches (3.2 cm).
Drive Belt Adjustment
1. Loosen the 7/16-inch jam nut on the belt width adjuster.
2. Using a 1/8-inch Allen wrench, turn the set screw inward (clock-
wise) to increase the distance between the sheaves or outward
(counter-clockwise) to decrease the distance.
3. Tighten the jam nut.
1
2
This manual is related to the following products:
- 2013 600 Switchback Pro-R 2013 600 Switchback Adventure 2013 800 Switchback 2013 800 Switchback Pro-R 2013 800 Switchback Pro-R Adventure 2014 600 Rush Pro-R 2014 800 Rush Pro-R 2013 600 Rush 2013 600 Rush Pro-R 2013 800 Rush 2013 800 Rush Pro-R 2011 600 Rush 2011 800 Rush 2012 600 Rush 2012 600 Rush Pro-R 2012 800 Rush 2012 800 Rush Pro-R 2012 600 Switchback 2012 600 Switchback Pro-R 2012 600 Switchback Adventure 2012 800 Switchback 2012 800 Switchback Pro-R 2014 600 Switchback 2014 600 Switchback Pro-R 2014 600 Switchback Adventure 2014 800 Switchback 2014 800 Switchback Pro-R 2014 800 Switchback Pro-R Adventure 2014 600 Indy Voyager 600 RUSH IQ Shift 600 2016 550 Indy 2010 120 Dragon 2015 550 Indy Adventure 155 2015 550 Indy Voyageur 155 2015 550 Indy 2010 Trail Touring 2016 550 Indy 144 2016 550 Indy LXT 144 2016 550 Indy Adventure 144 2016 550 Indy Adventure 155 2016 550 Indy Voyageur 144 2016 550 Indy Voyageur 155 2015 550 Indy 144 2015 550 Indy LXT 2015 550 Indy Adventure 2015 550 Indy Voyageur 2014 550 Indy 144 2014 550 Indy LXT 2014 550 Indy Adventure 2014 550 Indy Voyager 2013 550 IQ Shift 2013 550 IQ 136 2013 550 IQ LXT 2016 600 Indy 2016 600 Indy SP 2016 800 Indy SP