Polaris 2011 ATV Sportsman Touring 550 INTL - Manual (Page 92)

89
MAINTENANCE
Seats
Passenger Seat Removal
1. Pull the latch at the rear of the seat.
2. Pivot the rear of the seat upward and
remove the front legs of the seat base
from the frame.
3. To reinstall the seat, position the
front legs of the seat base under the
frame. Pivot the rear of the seat
downward onto the latch. Press
down firmly on the seat pad until the
latch clicks. Test the seat latch by attempting to pull the seat
upward.
Passenger Seat Backrest Adjustments
The passenger backrest can be adjusted horizontally and vertically.
1. Unzip the two zippers at the bot-
tom of the backrest pad. Lift the
pad upward to remove it from the
backrest frame.
2. To adjust the backrest forward or
rearward, loosen the top adjuster
bolt. Pivot the adjuster forward or
rearward to one of the three
adjustment positions and tighten
the bolt.
3. To adjust the backrest upward or
downward, loosen the four verti-
cal adjustment screws on the front
side of the backrest frame. Slide
the backrest upward or downward
to the desired position and tighten
the screws.
4. Reinstall the backrest pad.