Polaris 2011 ATV Sportsman Touring 550 INTL - Manual (Page 65)

62
OPERATION
Driving Through Water
Follow these procedures
when driving through
water:
1. Check water depth and
current before cross-
ing.
2. Choose a crossing
where both banks have
gradual inclines.
3. Drive slowly. Avoid
rocks and obstacles.
4. Avoid operating in
water deeper than the
bottom of the footrests.
If it's unavoidable, travel slowly, balance your weight carefully and
avoid sudden movements. Maintain a slow and steady forward
motion. Do not make sudden turns, stops or throttle changes.
NOTICE: Major engine damage can result if the vehicle is not thoroughly
inspected after operation in water. Perform the services outlined in
the maintenance chart. See page 70. The following areas need
special attention: engine oil, transmission oil, demand drive fluid and
all grease fittings
.
If the vehicle tips or overturns in water, or if the engine stops during or
after operating in water, restarting can result in serious engine
damage. Transport the vehicle to your dealer for service before
restarting the engine. If this is not possible, follow the vehicle
immersion inspection and drying procedures outlined on page 104,
then see your dealer for service at the first opportunity.
5. After leaving water, test the brakes. Apply them lightly several
times while driving slowly. The friction will help dry out the pads.
Maximum Depth