Polaris 2011 ATV Phoenix 200 - Manual (Page 79)

76
MAINTENANCE
Battery
Battery Removal
1. Remove the seat.
2. Disconnect the battery
hold-down strap.
3. On conventional batteries,
remove the battery vent
tube.
4. Disconnect the black
(negative) battery cable
first.
5. Disconnect the red
(positive) battery cable
last.
6. Lift the battery out of the battery compartment. Be careful not to tip
a conventional battery sideways, which could spill electrolyte.
NOTICE: If electrolyte spills, immediately wash it off with a solution of one
tablespoon baking soda and one cup water to prevent damage to the
vehicle.