Safety, Safety warnings, Stalling while climbing a hill – Polaris 2011 ATV Phoenix 200 User Manual
Page 19: Operating on steep hills
16
SAFETY
Safety Warnings
Stalling While Climbing a Hill
Stalling, rolling backwards or improperly
dismounting while climbing a hill could cause an
overturn.
• Always maintain a steady speed when climbing
a hill.
If all forward speed is lost:
• Keep body weight uphill.
• Apply the front brakes (right lever).
• When fully stopped, apply the rear brake as well,
and then lock the parking brake.
• Lock the parking brake when fully stopped.
• Dismount on uphill side, or to either side if ATV is pointed straight uphill.
• Turn the ATV around and remount, following the procedure described in the
owner's manual. See page 44.
If the ATV begins rolling downhill:
• Keep body weight uphill.
• Apply the front brakes gradually.
• Never apply the rear brake while rolling backwards.
• Never apply engine power.
• When fully stopped, apply the rear brake as well, and then lock the parking
brake.
• Dismount on uphill side, or to either side if ATV is pointed straight uphill.
• Turn the ATV around and remount, following the procedure described in the
owner's manual. See page 44.
Operating on Steep Hills
Operating on excessively steep hills could cause
an overturn.
Never operate on hills too steep for the ATV or for
your abilities. Never operate the ATV on hills
steeper than 25 degrees.