Polaris 2011 ATV Phoenix 200 - Manual (Page 27)

24
FEATURES AND CONTROLS
Switches
Light Switch
Use the headlight switch to turn the lights on and off and to change the
lights from high beam to low beam. The key must be in the ON position
to operate the headlights.
Engine Stop Switch
Before starting the engine, press the upper end of the switch down to the
ON position. To stop the engine, press the lower end of the switch down
to the OFF position. The engine will not start or run when the switch is
off.
Main Key Switch
Turn the main key switch clockwise to the ON position before starting
the engine. Turn the main switch off to stop the engine and end all elec-
trical power to the vehicle.
Start Button
To start the engine, make sure the stop switch is in the ON position.
Turn the main key switch on. Press the start button.
Override
Switch
ON
OFF
Start
Button
Light
Switch
Engine
Stop Switch
Main Key
Switch