PRESTIGIO EasiSign - Manual (Page 14)

User Manual EasiSign (Application Software) 12
to any machine demonstration. Fixed the machine first time start the software will
prompt the software to be registered, as shown in figure 3-2-1.
Fig.3-2-1-1 Registration Interface
If the software is registered before the trial registration code, click
button can continue to try out the software; if software is not previously registered,
or the number of days the trial has 0 days, you cannot continue to use, and click
button to pop-up registration code input box, as shown in Figure
3-2-1-2.
Fig.3-2-1-2 Registration Interface
In the state of network connected, input the 20 registration number of
purchased software provided by the manufacturer, click OK and enter the software
after successful registration.
3.2.2 Page Turning
Click on the signature corner of the upper or the lower edge, hold and drag to
the left to open the signature, as shown in Figure 3-2-2-1.