Grass Valley TTN-BVS-1602CP - Manual (Page 17)

BVS-1602CP Rev. 2
9
5.2 Router extension mode
Switch 5, 6 and 7 on the configuration switch set the router’s input offset in systems with 2 or more BVS-
1602CP. You can build systems up to 128x2. The chosen input offset defines on which input range each
BVS-1602CP works on.
The offset can be switched according to the following pattern:
- means switch down
* means switch up
Switch
5 6 7 Offset
- - - 0
- - * 16
- * - 32
- * * 48
* - - 64
* - * 80
* * - 96
* * * 112
Default is offset 0.
5.3 Vertical interval trigger
Switch 8 on the configuration switch enables or disables the VIT sensing on video input 1. If VIT
switching is enabled but a proper signal is missing, the router will automatically switch without VIT.
The VIT can be switched according to the following pattern:
- means switch down
* means switch up
Switch 8 VIT
- disabled
* enabled
Default is VIT enabled.