Electrolux 3173-4GS - Manual (Page 16)

Re-Hanging Door
16
0 Screw base back into place and
then stand the appliance up.
0 Reposition upper pivot pin to the
left side.
0 Pry out cap at upper left of the
door with a small screwdriver
and reposition it to the right
side.
0 Carefully set door into upper
pivot pin and close.
0 Place washer between door and
door pivot at bottom left, and
turn pivot pin (A) into lower door
pivot at the left.
0 Reposition door handle and
hole plug-pins as shown in the
diagram.