Best practices troubleshooting, Best practices, Troubleshooting – Grass Valley Python 3G User Manual
Page 46
42
Python 3G Operation
Best Practices
Best Practices
This section is devoted to a number of “Best Practices” for use of the Python 3G System.
• Take every precaution to prevent damaging your eyes while using the equipment.
• Protect the Fiber Optic Cable and the Fiber Optic Connectors. Always keep these
capped unless there are being connected.
• Read the section on planning the Fiber Run.
The Using Fiber Optics Guide explains how to manage and deploy your fiber optics
cabling, safety precautions, tips & tricks, and recommendations for creating complex
fiber optic networks. You can find a copy of this document on the Support portal (see
• Make sure that the Python 3G unit is secure and cannot be inadvertently moved. The
units may usually be rack mounted and therefore safe and secure, but in instances
where it must be used in “table top” operation, ensure that the connectors on both the
front and rear panels cannot be damaged by being inadvertently struck or pulled.
• Secure the power supplies and power connections so that power is continuous.
• Once the system is set up and running, monitor the system display carefully on the
Python 3G.
• Becausethe system is digital, the Signal Strength either meets or exceeds the system
requirements. When theSignal Strength is no longer strong enough, the signal stops.
• Be as careful during System tear down as during System setup.
Troubleshooting
Troubleshooting any technical issues with the Python 3G System is similar to any piece of
television production gear, with the exception of the core Fiber Optic technology.
Keep the following in mind:
• Check all your cablesfor any broken connections or bad connectors.
• Ensurethat your Power Supply is working properly.
If you cannot resolve the problem in the field, contact Support (