Grass Valley PAC 216 Upgrade - Manual (Page 11)

Installation Procedures
PAC 216 Upgrade Installation 3
Installation Procedures
The procedures that follow take you step-by-step through the installation of the
upgrade. You can install the daughter card with the unit’s chassis fully extended
on the rack slides if the equipment rack is adequately mounted to prevent tipping,
and if there is sufficient slack in the cables connected to the rear panel to allow the
chassis to fully extend on the slides.
If it is necessary for you to remove the PAC200 Audio Chassis from the
equipment rack to perform this installation, refer to the Profile system’s
installation manual for instructions.
WARNING: Unless the equipment rack is adequately anchored, the rack
could tip when the chassis is extended on the rack slides. To avoid possible
injury, make sure the rack is firmly anchored before extending the chassis on
the rack slides.
!