Grass Valley Profile Mix Effects Upgrade - Manual (Page 13)

Mix Effects Installation 1
Mix Effects Installation
Kit Description
This modification kit adds the Mix Effects circuit board to your Profile system.
In addition to these instruction, the Mix Effects kit consists of the Mix Effects
board.
Tools Required
Installation of the kit requires the following tools, which are not supplied:
• Torx screwdriver with T10 and T15 magnetic tips
• Grounding strap(s)
Handling Precautions
CAUTION: This product contains components that are highly sensitive to
electrostatic discharge. To protect these components from damage and to
maintain product reliability, take the following precautions when handling
the circuit boards:
Handle all circuit boards in a static-protected area capable of controlling
static charge on conductive materials, people, and non-conductive materials.
Static-protected areas include non-static table tops and non-static floor mats.
Handle the circuit boards only by the edges. Avoid touching the printed wires
on the back of the circuit board as much as possible.
Leave the board in its static-shielded bag until you are ready to install the
board.
!