Grass Valley PLS20 - Manual (Page 27)

Specifications
Profile PLS20 Data Tape Drive 17
Table 6. Input voltages
Table 7. SCSI cable specifications
Table 8. Terminator specifications
a. Each PLS20 tape drive attached to the SCSI bus uses 0.4 meters (1.31 feet) of cable
length internally. To determine the total length, add 0.4 meters (1.31 feet) to the length
of cable used on the bus for each tabletop tape drive.
Input Voltages
Automatic input
voltage selection. Accepts 120 or 240 VAC at 50 to 60 Hz.
SCSI Cable Specifications
Type Fast Wide Differential
Connector type Wide
68-pin male, high-density, shielded,
AMP 750752-1
Length (maximum)
a
Differential
25 meters (82 feet)
Terminator Specifications
Wide Differential Tektronix Part Number 011-0166-00