Grass Valley Kaleidoscope to Krystal Effect Translator - Manual (Page 3)

TP0864-00-A2 Copyright © Tektronix, Inc. Page 3 of 16
Kaleidoscope to Krystal Effect Translator
5. A progress bar will appear as the files are being installed. After a few
seconds the message “Krystal Translator Load Successful!” appears.
Click the “OK” button on this window.
6. Remove the floppy disk from the drive.
Because the installation process does not use DLLs, no changes will be
made to your Windows configuration and initialization files. Because of
this simplified installation process, the installed utility program will not
appear in the Windows 95 “Programs” window.
To remove the application from the computer, simply delete the directory
containing the installed program files.
General Operation
The Kaleidoscope to Krystal effect conversion process consists of the
following steps:
■
Select where the files to be converted are located.
■ Select the specific files to be converted.
■
Select a location to save the converted files.
■ Assign names to the converted files, if desired, or you can use default
names.
■ Perform the file conversion.
Several options are provided to add flexibility to the process.
Startup
You can start the Kaleidoscope to Krystal Effect Translator utility two
different ways:
1. If the default installation was used, you can double click “My
Computer”, “C: drive”, “KryTrans\” to open the directory containing
the program. Otherwise use standard Windows techniques to open the
directory. Then double click on the “Transl8” icon.
2. Alternatively, you can select “Start”, “Run”, type the path to the
Transl8 file (the default path is C:\KryTrans\transl8), then click the
“Run” button.