Grass Valley Kayak HD Installation Planning Guide v.6.9.4 Jun 02 2011 - Manual (Page 36)

36 Kayak HD — Installation Planning Guide
Section 3 — Frames
Kayak HD 150C, 200C, and 200 Panel Control Cabling
Figure 24 shows the basic control cabling for a Kayak HD 150C, 200C, or
200 system.
Figure 24. Kayak HD 150C, 200C, or 200 Standard Control Cabling
The Kayak HD 150C, 200C, or 200 system uses Ethernet, serial, and USB
connections. Tally and GPI/O control are also available. A simple Kayak
HD 100C system consisting of a Control Panel and Video Processor frame
uses point-to-point connections and does not require connection to an
external Ethernet Local Area Network (LAN). The video processor frame
incorporates an Ethernet switch for this purpose.
There are two AC power supply inputs to the frame. If the redundant
power supply option is installed, power can be provided by one or both
line cords to two different AC circuits.
USB P/S 2 3 4
OFF-10
AMBER-100
GREEN-1000
LINK/ACTIVITY
Supplied CAT5 Cable
Supplied DC Interconnect Cable
8324_13_
r1
Control Panel
Video Processor Frame
48V DC Output
to Control Panel
100-240V AC
Power Supplies
2 USB
Ports
PS/2
Port