Grass Valley K2 TX/MAM Server User Manual v.2.4 - Manual (Page 11)

K2 TX/MAM Server User Manual - document version: 2.4 - Page 11
11 Manually configuring the TX/MAM main and backup
server
On the active (main) TX/MAM server, the file /system/STATUS should contain:
active=yes
On the standby (backup) TX/MAM server, the file /system/STATUS should contain:
active=no

Via samba (windows network share) the STATUS file can be found here: \\IP-address>\delta\STATUS

When working from command line: /system/STATUS
To change a TX/MAM server from main to backup:
 On the main server, edit and safe the file /system/STATUS:
Change active=yes to active=no and save the file.
 Run the /system/nexusproc restart all command.
To change a TX/MAM server from backup to main:
 On the backup server, edit and safe the file /system/STATUS:
Change active=no to active=yes and save the file.
 Run the /system/nexusproc restart all command.