Grass Valley K2 TX/MAM User Manual v.2.2 - Manual (Page 41)

TX/MAM User Manual - document version: 2.2 – Page 41
8.9 Spotcheck and soft parts
Use the Spotcheck function to preview the quality of clips and to create soft part segments.
Example Spotcheck tab.
8.9.1 Quality Check (QC)
 Double-click the Asset you want to view, then select the Spotcheck tab.
 Click the icon for the clip or segment you want to preview.
 Use the control buttons, shuttle control and timeline to navigate through the clip.
 When finished, click the appropriate QC status icon (the default icons are listed below):
8.9.2 Creating Segments
 Double-click the Asset you want to trim, then select the Spotcheck tab.
 If you want to trim the main Asset you can skip the next two steps.
 If you want to create a Segment from the main Asset, click the create segment
button.
 Specify the external reference and click Save.
 Click the icon for the clip or segment you want to edit.
 Use the control buttons, shuttle control and timeline to navigate through the clip.
 Click the tc-in and tc-out buttons to set timecode in and out.
 Save tc-in/out to: select the main Asset or Segment you want to save time codes to.
Segments can be scheduled (drag and drop into POC), but are not listed in the Assets list.
8.10 Checking and modifying Job status
To view the Jobs linked to an Asset:
This file has not been checked.
This file has been checked and quality was good.
This file has been checked and quality was not good.