Grass Valley K2 TX/MAM Server Installation v.2.2 - Manual (Page 7)

K2 TX/MAM Server Installation and Service Manual - document version: 2.2 - Page 7
1) Connect the system to the LAN.
Network cable LAN-8 Connect to Gb1
2) Optional – Connecting the Keyboard and Monitor
The connectors on the back of your system have icons indicating which cable to plug into each
connector. Be sure to tighten the screws (if any) on the monitor's cable connector.
3) Connecting the power cords.
Power cables 12 -13 Connect the power cords
Connect the system’s power cable(s) to the system and, if a monitor is used, connect the monitor’s
power cable to the monitor.
4) Securing the power cord.
Bend the system power cable into a loop as shown in the illustration and secure the cable with the
provided strap. Plug the other end of the power cables into a grounded electrical outlet or a separate
power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU).
5) Power on.
Press the power button on the system and the monitor. The power indicators should light.