Grass Valley K2 TX/MAM Server Installation v.2.2 - Manual (Page 11)

K2 TX/MAM Server Installation and Service Manual - document version: 2.2 - Page 11
6.4 Configuring the ini-files
6.5 Configuring ini-files
On the K2Edge nodes, in /etc/hosts adjust MAIN-DB. Specify the virtual IP of the TX/MAM servers.
Example:
10.250.51.51 MAIN-DB
You can also specify the TX/MAM server via the IP Manager.
On both the TX/MAM servers, in
/usr/local/apache2/application/configs/application.ini, adjust
project_options.serverip. Specify the virtual IP of the TX/MAM servers.
Example:
project_options.serverip = "10.250.51.51"
On both the TX/MAM servers, in
usr/local/apache2/application/configs/ingest.ini, adjust
ingest.assetHostIp. Specify the virtual IP of the TX/MAM servers.
Example:
ingest.assetHostIp = "10.250.51.51"
On both the TX/MAM servers, set the time mode for the TX/MAM video player. The default is Relative.
To change to absolute:
Edit the file /system/objects/config/txmam.ini.
[production]
VideoPlayer.timeMode=Absolute
On both the TX/MAM servers, edit the file /system/objects/cobassets/bin/seq_brX.ini (X= 0 to 3)
Example:
[SequencerSettings]
BladeIniFile=/system/blade.ini
BroadcastSet=BROADCAST0
AppNiceParameter=-n20
SendFormatCounter=1
NoDuplicateOptOutBlock=
PreloadTime(sec)=30
SendScriptCueCommand=0
TimeCodeStartType=Absolute
TimeCodeNoTCEnd=