Grass Valley K2 TX/MAM Server Installation v.2.2 - Manual (Page 15)

K2 TX/MAM Server Installation and Service Manual - document version: 2.2 - Page 15
11 Appendix: Changing an IP-address
After changing the playout nodes’, TX/MAM or FTP-servers’ IP-address, following adjustments need to
be made:
After changing the IP-address of the playout nodes:
Change the IP-address in Cobalt Asset Manager Channel settings.
After changing the virtual IP-address of the TX/MAM-servers:
On standalone demo systems, the /system/txmam_fix_ip.sh script can be used.
On the K2Edge nodes, in /etc/hosts adjust MAIN-DB. Specify the virtual IP of the TX/MAM servers.
Example:
10.250.51.51 MAIN-DB
You can also set the IP-address of the TX/MAM server via the IP Manager.
On both the TX/MAM servers, in /usr/local/apache2/application/configs/application.ini, adjust
project_options.serverip. Specify the virtual IP of the TX/MAM servers.
Example:
project_options.serverip = "10.250.51.51"
On both the TX/MAM servers, in usr/local/apache2/application/configs/ingest.ini, adjust
ingest.assetHostIp. Specify the virtual IP of the TX/MAM servers.
Example:
ingest.assetHostIp = "10.250.51.51"