Electrolux EWN 14780 W - Manual (Page 14)

14 electrolux use
After you have pressed the Start/Pause
button and the machine has started, the
Door icon is lighted-on and only the
phase running icon stays on.
When the programme has finished, a
flashing zero (
0.00 ) is displayed and the
(Door) icon desappears.
Delay
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed. The relevant
phase icon
is lighted-on.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected,
the message Err is displayed at the
bottom of the display for about 2
seconds and the integrated red
Start/Pause light start flashing.
Temp. Spin Easy Iron Delay Rinse
Time
Manager
Extra
Start/
Pause
Temp. Spin Easy Iron Delay Rinse
Time
Manager
Extra
Start/
Pause
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example
E20 (see paragraph
“Something not working”).
End of programme
When the programme has finished a
flashing zero is displayed, the
(Door)
icon desappears and the door can be
opened.
Heating phase
During the washing cycle the display
shows the temperature icon animated
to indicate that the appliance has
started the heating phase of the water
in the tub.
Temp. Spin Easy Iron Delay Rinse
Time
Manager
Extra
Start/
Pause
Temp. Spin Easy Iron Delay Rinse
Time
Manager
Extra
Start/
Pause
Temp. Spin Easy Iron Delay Rinse
Time
Manager
Extra
Start/
Pause
132972160 EN.qxd 30/03/2007 15.42 Pagina 14