Turn the programme selector dial to « o, Depress start/pause button, At the end of the programme, the display shows a – Electrolux EWN 14780 W User Manual

Page 12

12 electrolux use

To empty out the water:

●

turn the programme selector dial to
«O»

●

select the

(Drain),

(Spin) and

(Delicate Spin) programme

●

reduce the spin speed if needed, by
means of the relevant button

●

depress Start/Pause button

●

at the end of the programme, the
display shows a

0.00

flashing.

The

(Door) icon desappears and

the door can be opened.

Night Cycle

: by selecting this

option, the machine will not drain the
water of the last rinse, so as not to
wrinkle the laundry.

As all spinning phases are suppressed,
this washing cycle is very noiseless and
it can be selectionned at night or in
times with a more economical power
rate.
In some programmes the rinses will be
performed with more water.

When the programme has finished, the
display shows a

0.00

flashing, the

(Door) icon is still visualized, the
Start/Pause light is off and the door is
locked to indicate that the water must
be emptied out.

To empty out the water, please
read the previous option steps.

Select the Easy Iron option

Selecting this button the laundry is
gently washed and spun to avoid any
creasing. In this way ironing is easier.

Furthermore the machine will perform
some additional rinses for cotton and
synthetics.

This function can be used for cotton,
synthetic fabrics and the programme
Jeans.

Select the Extra Rinse option

This button can be selected with all
programmes except the Wool,
Handwash, Duvet, Lingerie, Silk, Quick
Wash and Shirt programmes. The
machine performs some additional
rinses.
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft.

Select the Delay start

Before you start the programme, if
you wish to delay the start, press the
Delay Start button repeatedly, to select
the desired delay.

The corresponding icon will

appear

on the display in the upper part of the
display.

The selected delay time value (up to 20
hours) will appear on the display for
about 3 seconds, then the duration of
the programme will appear again.

Temp.

Spin

Easy Iron

Delay

Rinse

Start/

Pause

Time

Manager

Extra