Grass Valley K2 Lx0 RAID - Manual (Page 8)

8 Monitoring the K2 Lx0 RAID with NetCentral September 7, 2007
Monitoring the K2 Lx0 RAID with NetCentral
Monitoring K2 Lx0 RAID Power
The Power subsystem displays the information about the K2 Lx0 RAID power
supplies. If the status is green, the power supply is connected and NetCentral is able
to monitor it. If the status is red, NetCentral has detected a problem. If the status is
black, NetCentral is unable to detect anything.
1. In NetCentral, select Facility .
2. Expand the NetCentral tree view and locate the K2 Lx0 RAID device icon.
3. Click on the Power subsystem.
Monitoring K2 Lx0 RAID Versions
The Versions subsystem displays information about the specific version of each
controller, disk, or network or expansion adapters. If applicable, the serial number is
also listed.
1. In NetCentral, select Facility .
2. Expand the NetCentral tree view and locate the K2 Lx0 RAID device icon.
3. Click on the Versions subsystem.