Grass Valley K2 Lx0 RAID - Manual (Page 6)

6 Monitoring the K2 Lx0 RAID with NetCentral September 7, 2007
Monitoring the K2 Lx0 RAID with NetCentral
3. Click on the System subsystem.
Monitoring K2 Lx0 RAID Modules
The Modules subsystem displays the information about the K2 Lx0 RAID controllers,
power, network, and expansion adapters. If the status is green, NetCentral is able to
monitor the module. If the status is red, NetCentral has detected a problem. If the
status is black, NetCentral is unable to detect anything for the module.
1. In NetCentral, select Facility .
2. Expand the NetCentral tree view and locate the K2 Lx0 RAID device icon.
3. Click on the Modules subsystem.