Grass Valley FIO-991P - Manual (Page 5)

GUIDE TO INSTALLATION AND OPERATION
FIO-991p | 1
1
FIO-991p Standalone 3G/HD/SD/MADI electrical/optical
converter
1.1 Introduction
The FIO-991p series are flexible serial digital video to/from fiber converters.
They are designed for SD, HD and 3G serial video as well as compressed
bit-streams (DVB-ASI) and MADI digital audio. The series supports any data
rate within the range of 19.4 Mbps to 2.97 Gbps and provides a reclocked
serial digital video from 270Mbps to 2.97 Gbps. The FIO-991p series offers
eight different main configurations: Single or dual channels Tx, single or dual
channels Rx, bi-directional Rx/Tx and an Rx/Tx repeater with electrical drop.
The series is based on hot-swappable SFP modules that provide easy
product maintenance and flexibility when multiple wavelengths are needed
(as for CWDM).
1.2 Features
•
Convenient 3gbps/HD/SD and MADI standalone fiber interfaces
•
Supports any serial data rate from 19.4 Mbps (ATSC) to 2.97Gbps
(3G SDI)
•
Re-clocked serial digital video from 270Mbps to 2.97Gbps
•
Provides unidirectional or bi-directional interface between serial
digital and fiber optics
•
Single or Dual Tx, Single or Dual Rx or combined Rx/Tx
configurations
•
Supports Multiple wavelength from the standard 1310 nm, 1550 nm
to multiple CWDM wavelengths
•
Well integrated WDM (1310/1550) solution for dual Tx, Dual Rx and
Rx/Tx cards
•
Ideal for long video run with “Hum” immunity
•
Presence/loss of signal alarm
•
Optical Power level out-of-range warning (receiver only)
•
The SFP modules are fully hot swappable.
•
Operation from 5 Volts DC.