Grass Valley FIO-991P - Manual (Page 3)

GUIDE TO INSTALLATION AND OPERATION
FIO-991p
Radio Frequency Interference and Immunity
T his equipment has been tested for verification of compliance with
FCC Part 15, Subpart B requirements for Class A digital devices.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
This equipment has been tested and found to comply with the
requirements of the EMC directive 2004/108/CE:
•
EN 55022 Conducted emissions, Class A
•
EN 55022 Radiated emissions, Class A
•
EN 61000-4-2 Electrostatic discharge immunity
•
EN 61000-4-3 Radiated electromagnetic field immunity - RF
•
EN 61000-4-8 Power frequency magnetic field immunity
•
EN 61000-4-11 Voltage dips, short-interruption and voltage
variation immunity
•
ENV50204 Radiated EMF immunity – RF 900MHz pulsed
Power supplies:
pL-tray frame power supply
5VDC, 3.0A, I.T.E. external power supply
•
CSA/UL 60950-1 for Information Technology Equipment