Grass Valley EC 270 - Manual (Page 20)

20 EyeCatcher EC 270 2.7-inch Color LCD Ocular Viewfinder User’s Guide (v1.2)
Chapter 2 - Operation
2.3 Viewfinder menu
2.3.1 Entering the menu
Many viewfinder functions can be set up in the viewfinder menu. Enter the menu as
follows:
• Make sure the mode switch on the rear panel is set to Menu (left position).
• Press the menu rotary to open the menu. A black bar with menu items
appears at the bottom of the viewfinder screen.
• Use the menu rotary to navigate to the PREV/NEXT item at the right side of
the screen.
• Press the rotary to open a list of submenus. The PREV/NEXT item is blinking.
• Turn the menu rotary to loop through the submenus. The submenus are
shown on the bottom bar.
• Press the menu rotary to leave the list and enter the selected submenu.
• Turn the menu rotary to loop through the items in the menu.
• Press to change the value of the selected item. Items with toggle values are
changed immediately. Items with select values start blinking and their value
can be changed by turning the rotary. Pressing stores the current value.
• When you are done making changes, navigate to the EXIT MENU item at the
left side of the screen. Press to leave the viewfinder menu. The black bar
disappears.
Buttons
Config1
Diag
Config2
Color
Mono
Box
CONFIG2
EXIT Text PkCol INDADJ
NEXT
PREV