Grass Valley Audio Bridge Terminal 2014 - Manual (Page 25)

15
Audio Bridge Terminal
Guide to Installation and Operation
If the ZIP file is valid, the CPU and FPGA versions of the firmware appear, and the Select
check box becomes available.
7 Select the Select check box:
The UPGRADE button becomes available.
8 Click UPGRADE.
A confirmation message appears.
9 Click Yes to proceed with the upgrade.
The CPU is upgraded first. Once the CPU upgrade has completed, the ABT restarts
automatically. This may take 20 seconds, during which a message is shown in the
progress area of the window.
IMPORTANT
Do not interrupt the upgrade process. This could corrupt the firmware and
render the ABT inoperative.
Note: On the ABT’s front panel, LEDs will flash red during the file transfer
and upgrade.