Grass Valley 8945EDA v.1.3.0 - Manual (Page 18)

18 8945EDA/-D — Instruction Manual
Power Up
Power Up
The on-board LED (DS11) indicators are illustrated in Figure 7 . Upon
power-up, the green PWR LED should light and the CONFIG, FAULT, and
COMM LEDs should illuminate for the duration of module initialization.
Operation Indicator LEDs
With a valid input signal connected, the green on-board PWR LED, PRES
IN LED should be on. Refer to
Table 3 on page 19 to see a complete list of
possible operating conditions and the resulting indicator status.
Figure 7. LEDsIndicators
The following LEDs are not used on the 8945EDA and 8945EDA-D mod-
ules:
• PRES OPT IN,
• PRES OPT MOD,
• SD/HD/ASI, and
• LOCK.