H3C Technologies H3C SecPath F5000-S Firewall User Manual
Page 4
1
2
3
4
5
6
7
Assign the PC an IP address 192.168.0.0/24
(except 192.168.0.1), connect the PC to
GigabitEthernet 0/0, and launch a Web browser.
On the Web login page, configure the following
items as shown in the figure and click Login.
In the Web interface, select Wizard from the
navigation tree. Click the Basic Device
Information link to enter the basic
configuration page. Click Next.
Configure the system name and user password,
and click Next.
is effective
only for locally authenticated users but not for
remotely authenticated users.
Configure services as needed and click Next.
Complete NAT configuration as needed and click
Next.
Select Save Configuration to save the current
configuration. If the current configuration is correct,
click Finish to complete the configuration.
Configuring IP addresses for interfaces and
click Next.
Performing Basic Configurations in the Web Interface