Ensemble Designs 6600 Series Analog Audio DAs and Frame Models 6601, 6601R and Frame 6600 User Manual
Page 15
•
To prevent injury:
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
•
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
•
Use caution when installing or modifying telephone lines.
Cautions
•
When installing this equipment, do not attach power cord to building surfaces.
•
To prevent damage to equipment when replacing fuses, locate and correct the
trouble that caused the fuse to blow before applying power.
•
Verify that all power supply lights are off before removing power supply or
servicing equipment.
•
Use only specified replacement parts.
•
Follow static precautions at all times when handling this equipment.
•
Leave the back of the frame clear for air exhaust cooling and to allow room for
cabling. Slots and openings in the cabinet are provided for ventilation. Do not block
them.
•
Front door is part of fire enclosure and should be kept closed during normal
operation.
•
This product should be powered on as described in the manual. To prevent
equipment damage select the proper line voltage at the ac input connector as
described in the Installation documentation.
•
To prevent damage to this equipment read the instructions in this document for
proper input voltage range selection.
•
To reduce the risk of electric shock, ensure that the two power supply cords are
each plugged into a separate branch circuit.
•
Circuit boards in this product are densely populated with surface mount and ASIC
components. Special tools and techniques are required to safely and effectively trou-
bleshoot and repair modules that use SMT or ASIC components. For this reason,
service and repair of ISIS products incorporating surface mount technology are
supported only on a module exchange basis. Customers should not attempt to trou-
bleshoot or repair modules that contain SMT components. Ensemble Designs
assumes no liability for damage caused by unauthorized repairs. This applies to
both in- and out-of-warranty products.
Model 6600 Analog Audio DAs and Frame
6600-15