Ensemble Designs 7410 Quad HD Tri-Level Sync Generator - Manual (Page 12)

Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control status menu for this module is illustrated and
explained below. For more information on using Avenue Touch Screen, refer to the Avenue
Touch Screen data pack that came with the option.
Parameter fields that are grayed out can indicate one of the following conditions:
• An option is not installed.
• The function is not active.
• The module is locked.
• The User Level set with Avenue PC is not accessible from the current User Level.
7410 Avenue Touch Screen Menus
The TLS Gen 1 menu screen shown below allows you to set the following parameters for
the first generator output:
• HD Standard – select the HD Standard desired: 720p 50 Hz, 720p 59.94, 720p 60,
1080i 50, 1080i 59.95, 1080i 60, 1080p 23.98, 1080p 24, 1080p 25, 1080sF 23.98,
1080sF 24, or 1080sF 25.
• TLS 1 Status – reports the lock status as one of the following: Ext 10 Mhz Ref,
Internal Ref, Video Lock to Ref 1, Clk lock to Ref 1, Vid Lock to Ref 2,
Clk Lock to Ref 2, or No Ref - Freerun. .
Use the controls to set the timing of the Primary composite output in relation to the
reference with the following controls. For numerical choices, use the slider control to select
a value or touch the number field at right to bring up a pop-up keypad. Enter a value and
press the Enter key.
• Vert Timing – set the vertical timing in lines.
• Hor Timing – set the horizontal timing in clocks.
Use the same process for adjusting parameters for TLS Gen 2, Gen 3 and Gen 4.
Model 7410 HD Tri-Level Sync Generator
7 410-12