Ensemble Designs 4110 ASI Distribution Amplifier - Manual (Page 6)

Front Panel Controls and Indicators
Each front edge indicator and switch setting is explained in the diagram below:
Model 4110 DVB-ASI DA
Remote/Local switch:
Set to the mode you
will be using.
EQ OK green LED:
ON indicates signal is present
and equalized for all outputs.
OFF indicates the signal may not
be present or equalized.
Pwr green LED:
Indicates the presence (ON) or
absence (OFF) of power (+5V).
Run green LED:
OFF:
A power fault of halted CPU
ON:
A halted CPU
FAST BLINK:
CPU Run error
SLOW BLINK:
System OK. (If SPI control is
active from the main frame
System Control Module, all
Run indicators will be syn-
chronized.).
4110-6