Ensemble Designs 5140 Analog EQ DA - Manual (Page 7)

Front Panel Controls and Indicators
Each front edge indicator and switch setting is explained in the diagram below:
Model 5140 Analog EQ Video DA
Run
Pwr
5140
Analog
EQ
DA
Gain
In OK
REMOTE
LOCAL
Fine EQ
E
D E S I G N S
N S E M B L E
Remote/Local switch:
Set to the mode you
will be using.
In OK green LED:
ON indicates presence of valid
analog video signal (meets NTSC
or PAL sync specifications).
OFF indicates sync signal is not
present or invalid (does not meet
NTSC or PAL sync specifications).
Pwr green LED:
Indicates the presence (ON) or
absence (OFF) of power (+5V).
CPU green LED:
OFF:
A power fault or halted CPU
ON:
A halted CPU
FAST BLINK:
CPU Run error
SLOW BLINK:
System OK. (If SPI control is
active from the main frame
System Control Module, all
Run indicators will be syn-
chronized).
GAIN Adjustment:
Adjusts all nine analog
outputs equally.
5140-7