2 getting started, Running service log in – Eneo PNR-5108 User Manual
Page 26
Quick Reference Guide
20
4. When the following screen appears, click Next.
Refer to the User’s Manual which is included
on the CD for the setup instructions in detail.
4.2 Getting Started
Running Service
When the federation service installed, the service runs automatically. You can
also start or stop running the service manually. Go to the Start Menu in the
federation server → Click iNEX → Run the Service Manager program.
Check the status of the service. If the service is not
listed as Working under Status, start the service
manually.
Log In
You are required to log in to the federation service when running the Setup and Client program.
Go to the Start Menu in the federation server or Client system → Click iNEX → Run the iNEX Setup or
iNEX Client program and enter login information.