Eneo PNR-5108 - Manual (Page 11)

Network Video Recorder
5
 VGA: ATI RadeonTM HD 3650 or NVIDIA GeForce 8400GS (ATI recommended) (1024x768, 24bpp
or higher)
 Hard Disk Drive: 350 MB or more free space
 LAN: Gigabit Ethernet or faster
Minimum System Requirements
 Operating System: Microsoft ®
Windows
®
XP Home SP 3
 CPU: Intel Pentium IV 3.0 GHz or faster
 RAM: 1.5 GB or more
 VGA: ATI RadeonTM HD 2400 or NVIDIA GeForce FX5500 (ATI recommended) (1024x768, 24bpp
or higher)
 Hard Disk Drive: 350 MB or more free space
 LAN: 10/100 Mbps Ethernet or faster
Installation
NOTES:
 The Client program should be installed on a PC for monitoring, recording and playback of video. If necessary,
install the federation service for management and monitoring of multiple NVR systems. Refer to ‎Chapter 4
— Federation Service (p. 21) for details about the federation service.
 In the Windows Start menu, go to Control Panel. Double click the Power Options to open the Management
Properties dialog box. Under the Power Schemes tab, set both Turn off monitor and Turn off hard disks
to Never.
CAUTION: If an older version of iNEX software is installed on your computer, a screen
appears asking you to upgrade the software. In this case, you are required to upgrade the
software according to the instructions in the screen.
1. Insert the software CD in the PC.
2. Run the ClientSetup.exe file of the software CD.
NOTE: The User Account Control window might appear when using the Microsoft
®
Windows
®
Vista or later
operating system. Click Allow and install the software following the instructions.
3. Select the language in which to run the program and then click OK.
NOTES:
 To properly display the se
lected language, your PC’s operating system should be set to support the
selected language.
 To change the iNEX program’s language after the software has been installed, select Language Selector
in the iNEX → Utility folder of the Start menu before running the iNEX program.