Electrolux EKC60752 - Manual (Page 25)

24
Selection of heat retention
All four cooking zones are fitted with a heat
retention setting .
Use area to set the heat retention
position .
Choose Stop+Go
The Stop+Go function switches all the
connected cooking zones to heat retention
setting at the same time and then back to the
earlier heating setting. This function is
suitable for a short interruption before
continuing with cooking, for example to
answer the telephone.
Press and the heat retention position
is shown.
To switch off the function, press and the
earlier heating setting is shown in the
display.
The Automax function
This cooker is fitted with a special automatic
heating system called Automax.
The function is engaged each time you
wish to use it. It works like this:
You select the setting for the heat that you
consider suitable for cooking/roasting. The
heating zone starts at the highest heat setting
and goes over automatically to the selected
setting after a certain time.