Eneo HDB-2080M2810IR D - Manual (Page 24)

FULL-HD MEGA-PIXEL CAMERA
24
Operating Instructions
: Enables or disables to display the OSD.
• ID : ON enables to display the camera ID defined by SYSTEM>COMM.
SETUP>CAM ID.
• TITLE : ON enables to display the camera title(name) set by SPECIAL>
TITLE SET.
• D-ZOOM RATIO : ON enables to display the zoom ratio on the bottom right
corner. DZx.x will display by multiplying the actual digital zoom ratio.
8-6. DISPLAY
• MODE
- AUTO : Enhance the foggy video automatically according to status of scene.
- MANUAL : Sets to enhance the foggy video manually regardless of status
of scene.
• LEVEL : MID, HIGH, LOW
Video quality can be less in normal environments.
8-7. DEFOG (default: OFF)
8-8. ZOOM MODE (default: OFF)
TITLE SET
RETURN
A BCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
o p q r s t u v w x y z , . ( ) { : [ ]
0123456789*+-/=l ! ? “ ‘
SP BS CLR POS
PRESET ZOOM
ZONE NUM
ZONE VIEW
H-POS
V-POS
D-ZOOM RATIO
STAYING ZOOMING
RETURN
↵
1
ON
5
5
3sec
DX2.0
RET ↵
By Remote Controlloer only.
ON enables to select POINTING
ZOOM, PRESET ZOOM or FLEX
zoom modes.
8-8-1. POINTING ZOOM:
• H-POINTER, V-POINTER
- Able to set the location of
zoom center D-Zoom is
available DZ X1.1~ X8.0.
(See page No.28 “POINTING
ZOOM”)