Eneo HDB-2080M2810IR D - Manual (Page 22)

FULL-HD MEGA-PIXEL CAMERA
22
Operating Instructions
|:::::::|::::::| 10
10
5
40
25
OFF
OFF
OFF
5sec
MOTION
SENSITIVITY
H-POS
V-POS
H-SIZE
V-SIZE
BLOCK DISP
MOTION OSD
SMART MOTION ZOOM
STAY ZOOMING
RETURN
RET
• SENSITIVITY : Adjusts the detection sensitivity for motion.
High value increases the sensitivity to detect the small motion easily. Too low
sensitivity will cause the erratic detection by the tree leaves or the light level
changes.
• H-POS, V-POS, H-SIZE, V-SIZE: Adjust the size and position of the detection
window.
• BLOCK DISP : ON enables to display the blocks for the detected area.
• MOTION OSD : ON enables to display a text message, MOVING !!!,
• SMART MOTION ZOOM : ON enables to Automatic Zoom IN/OUT when
motion is detected and also enables MOTION OSD to ON.
: MOTION can detect the changes in the motion window and displays the results
in blocks and/or a text message.
8-3. MOTION (default: OFF)
8-2-2. POLYGON : Set area to select privacy zones by polygon shape
• ZONE NUM : Set a number to select a privacy zone from 1~10.
• ZONE DISP : ON enables a relevant privacy zone.
• H-POS, V-POS, H-SIZE and V-SIZE : Adjust the size and position of zone.
• COLOR : Select the color used for masking the zone form eight colors.
• TRANSPARENCY : Defines the transparency for the mask zone.
• ZONE NUM : Set a number to select a privacy zone from 1~4.
• ZONE DISP : ON enables a relevant privacy zone.
• COLOR : Select the color used for masking the zone form eight colors.
• TRANSPARENCY : Defines the transparency for the mask zone.