ATL Telecom Delta 700 - Manual (Page 14)

Making or Answering a Call
Using auto-line selection:
1. Press [Handsfree] or pick up the
handset. The telephone will select
an appropriate line and connect it.
The Call timer will start 3 seconds
after the phone is connected to the
line.
2. To end the phone call, press the
active line, press [Handsfree] or
replace the handset.
Picking the line yourself:
1. If you want to manually choose the
line, press the line you desire (eg
Line 2). The phone will connect to
Line 2 and operate in the handsfree
mode.
2. To end the phone call, press [LINE 2],
[Handsfree], or replace the handset.
Answer a call during a conversation:
1. Caller ID information, if any, will be
displayed after one ring.
2. To answer the new call, press the
ringing line. The telephone will switch
to that line. The previous call will be
terminated.
3. Call timer will start 2 seconds after
the machine is connected to the line.
14
Connecting your Telephone Lines
Wherever you intend to locate your
phone, have your local telephone
company install as many telephone
lines and wall sockets as necessary to
enable you to connect it.
11
Connecting the phone with a single
line.
Connecting the phone using two
lines.
LINE 1, 2 LINE 2
RINGER 2 RINGER 1
HI LO W OFF HI LO W OFF
Last Number Redial
1. Press [Redial].
2.
The telephone will automatically
connect an available line and dial out
the last number dialed.
OR
1. Access the line manually.
2. Press [Redial].
Placing a Call on Hold
1. While a line is active (eg. Line 2),
press [Hold].
2. The call is put on hold, the Line 2
LED will fl ash and the display will
show “HOLD: LINE 2.”
3. Press the line key for the line (eg. [LINE
2 ]) to continue the conversation.
INSTALLATION BASIC OPERATION