ATL Telecom Delta 40 User Manual

Page 10

SETUP

go on to the next item, press SET.

Press and release NEXT
or PREVIOUS until the unit
announces and displays the
correct incoming message
length.

Once the length is set, press
SET. The unit announces the
message length, then enters
the security code menu.

SETTING THE SECURITY CODE

The security code is a programmable
4-digit code which can be used to
access remote functions.

Press and release NEXT or
PREVIOUS to choose the
second digit (the fi rst digit is
not programmable). The unit
announces all 4 digits, but only
the selected digit will change.

Once you have the desired
second digit, press SET to save
it and move on to the third digit.

Press and release NEXT or
PREVIOUS to choose the third
digit. Only the third digit will
change.

Once you have the desired third
digit, press SET to save it and
move on the fourth digit.

Press and release NEXT or
PREVIOUS to choose the fourth
digit. Only the fourth digit will
change.

Once you have the desired
fourth digit, press SET to save
it. The Delta 40 repeats all the
settings.

NOTE: To exit any menu, press and

release STOP. Also, set up will
cancel if no buttons have been
pushed within 30 seconds.

IMPORTANT

The fi rst digit is factory set at zero
and cannot be changed. The unit
announces the current security code.
To change, press NEXT or PREVIOUS.
To set and exit press SET.

USING YOUR DELTA 40

ADJUSTING THE VOLUME

Use the VOLUME + and - buttons to
increase the volume up and down. The
unit bleeps when it is not announcing
a setting or playing a message. It also
beeps three times when the maximum
or minimum volume is reached.

GREETING INDICATORS

The GREETING indicators let you
know what greeting will be used to
answer a call.

GREETING A indicator is on -
Greeting A will be used.

GREETING B indicator is on -
Greeting B will be used.

ANSWER ON/OFF INDICATOR

When the Delta 40 is off, it will answer
an incoming call after ten rings and
enters a monitor only mode. In this
mode the Delta 40 does not initiate a
greeting or take messages .

Indicator is ON - Delta 40 is on
and will answer calls according
to the Rings to Answer setting.

Indicator is OFF - Delta 40 is
off, but you might still have
messages.

NOTE: You can play messages,

review/change settings, and

review/change the greeting
even if the Delta 40 is off.

►

MESSAGES COUNTER

The MESSAGES counter gives
you a numeric display of how many
messages you have.

MESSAGES counter has a
number displayed (not fl ashing)
- No new messages. Shows
total of old messages.

MESSAGES counter has a
fl

ashing number displayed

- There are new messages.

Shows total of new and old
messages.

MESSAGES counter has bars
(--) - Unit is OFF or in remote
control mode.

MESSAGES counter has an “F”
fl ashing on the display - memory
is full.

NOTE While the messages are playing,

the MESSAGES counter will
display the messages in the
order they were received.

MAILBOX INDICATORS

The mailbox indicators tell you if you
have any messages in each individual
mailbox and if they are new or old.

Mailbox indicator is on - There
are no new messages, but there
are old ones

Mailbox indicator is off - there
are either no messages or the
Delta 40 is turned off.

►

IMPORTANT

In the event of a power outage, no
messages will be lost.