ATL Telecom Berkshire MR51 User Manual
Page 21
ATL
Telecom
Berkshire MR51 & 61 User Guide
02/01/03
Page 21 of 25
MR51/61 Memory Address Profile Notes
968 Dial Pause - Time delay between line ownership and
commencement of dialling (100~1200ms.) default = 1000ms.
969 Extension Pause – Time between groups of digits such as an
extension that follows a Pick-up command. This is to overcome some
exchanges not being fast enough to process the data. (100~1200ms.)
default =500ms.
970 Disc Pause – Before a line self terminates it is sometimes necessary
to allow time for the switch to announce that a feature has been
enabled. Eg. Divert, DND. (1~12 sec.) default = 5 sec.
971/976 V/M Divert – Usually left unprogrammed unless used with a
Nokia switch (Optional use of special short codes).
977 CLIP / Call Line Identity Presentation
3
– Allows for the display
to show a callers Name - default = on
978 Cable CLI
1
– Selection of FSK formats :
Bell Core (Cable) only = on
Bell Core (Cable) + BT SIN242 = off.
981 Current Active Profile – Selection of facility codes/switch (1~32)
default = 01
983 ELR/TBR selection
1
– default = TBR
989 TBR timing – default = 100 ms. (100 ~1200ms.)
990 ELR timing – default = 400 ms. (100 ~1200ms.)
Programming Access Digit
(‚), (Set), (SHIFT), (‚), (Calls), (Access Digit), (Set)
Note: If you want to cancel; press the (Cancel) key instead of digit.
3
Press Cancel to Toggle between ON and OFF