ATL Telecom Berkshire MR42 - Manual (Page 8)

SAVE NUMBER REDIAL
The last number dialled (24 digits maximum) can be saved for redialling. This enables you to
make other calls without losing this number as happens with the REDIAL button.
To save the last number dialled:
• Before clearing down from the call in progress, press the SAVE No. button.
To redial the saved last number:
• Press the DIAL then Save No. buttons.
SERVICE BUTTONS
To make a service call:
• Press the required Service button, followed by DIAL
• The display shows the name (you will hear the number being sent).
MAKE 2nd CALL and CONFERENCE BUTTONS
In some cases the Services provided will include MAKE 2nd CALL and CONFERENCE.
These allow you to dial a second call whilst already engaged in the first one. It does not matter if
the first call is one you started or one you answered, and this second call can be to anywhere in
the world, external or internal.
These facilities enable you to set-up a call to two different numbers at the same time.
To make a second call:
• Make a call to the first person in the usual way and then tell them what you are going to do.
• Press MAKE 2nd CALL. You will hear dial tone. The first call will be on hold and unable to hear
you.
• Dial your second number and when they answer, tell them what you are doing.
• To return to the first call, press SHUTTLE and you will be connected again to the first call. The
second call will be on hold and unable to hear you.
You can SHUTTLE backwards and forwards between the two calls, with only the connected call
being able to hear you. This type of call is known as a 'Broker call', -very useful for negotiations.
To make a CONFERENCE call:
• Make a call to the first person in the usual way and then tell them what you are going to do.
• Press MAKE 2nd CALL. You will hear dial tone. The first call will be on hold and unable to hear
you.
• Dial your second number and when they answer, tell them what you are doing.
• Press CONFERENCE. All three parties will be able to hear each other.
You cannot make a CONFERENCE call back into a one-at-a-time ('Broker call').
Note that you will usually be able to have up to 7 other people in a conference call if you so
desire; to set this up just use the MAKE 2nd CALL button as above several times, BEFORE
finally pressing CONFERENCE.