ATL Telecom IP-3072 PoE Smart Office IP Telephone User Manual
Page 31
Page 31
MOCET IP3072 Smart Office IP Desk Phone Administrator Guide
Getting the APS Server Address
The default APS server must be provided by the Operator/ ITSP or DHCP options.
Users are allowed to change the APS server by option “APS File Server Address” via Web
Configuration Interface, and they can disable APS function by clear this option or uncheck
the “Enable Auto Provisioning” option. “Enable Auto Provisioning” option is false by default.
For example, find options below in $MAC.xml, and modify the values.
1
0
192.168.1.100
DHCP Type (Default Network Type)
IP3072 phone will try to get the APS server address from DHCP option 66/150/159/160.
The option checking priority will be 160/159/150/66, and APS Server address supports
both IP address and URL.
If the phone does not get this information, it will use the local APS server address setting.
Static IP
The phone will use the APS server address specified in the web interface of the phone.
Firmware Upgrade
After the APS is enabled manually, IP3072 phone will try to download TCM_IP3072.xml
from the APS server with the format of
http://server-address/firmware/TCM_IP3072.xml
.
For example, it will request the file as
http://aps.customer.com/firmware/TCM_IP3072.xml
.
When the provisioning IP3072 XML file is downloaded successfully, then it will perform the
firmware upgrade check by checking
1. If the version of firmware in the phone is different from the one which is specified in
the provisioning file, the phone will try to download the new firmware from the
address specified in the
will reboot and perform the same provision action above again.