ARM Electronics XR&HD480 Series - Manual (Page 10)

10
Connect the DVR via the Remote Software
Setup Requirements:
• Make sure the PC is connected to the Internet.
• Obtain IP address of the Premium H.264 DVR. To check the DVR’s IP address, press MENU on
the front panel and select <System Setup> Æ <Network Setup> Æ <LAN Setup> Æ <IP> to
check the IP.
Changing Internet Setting:
• Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and
then click the <Security> tab.
• Select <Trusted Sites> and click <Sites> to specify its security setting.
• Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of the
unit in field and click <Add> to add this website to the zone.
• In the Security Level area, click <Custom Level>. Under <ActiveX controls and plug-ins>, set
all items to <Enable> or <Prompt>.
• Click <OK> to accept the settings and close the <Security Settings> screen.
Using the Remote Software:
• Start the IE and enter the IP address of the Premium H.264 DVR in the address bar.
• The ActiveX controls and plug-ins dialog will show up twice for confirmation; click <YES> to
accept ActiveX plug-ins. The DVRRemote plug-ins will be downloaded and installed on the PC
automatically when the connection is successfully made.
NOTE: Do not enter any leading “0” characters in the address, for example,
“192.068.080.006” should be entered “192.68.80.6”.
NOTE: If the default trigger port 80 is changed into another one, take port 81 for
example, users should enter the IP address as “192.68.80.6:81”.
• Version verification starts automatically to verify whether DVRRemote was installed. This
process may take up to 30 seconds.
• When the software is completely downloaded and installed, the Login Screen is displayed.
• Enter username and password. The default username and password is admin and 1234.