ARM Electronics JDVR - Manual (Page 30)

B e s t p ic tu re q u a lity D V R
JP E G 2000 S tan d- alo ne D VR
29
CHAP. 5 Set Up
2) RS-232C SETUP
User can control the DVR via RS-232C port.
Connect DVR to PC via RS-232C port and user
can control DVR using keyboard of PC.
This function is mainly for programmer who
wants to control DVR as part of many devices
connected to PC system, as in SI project.
3) PAN/TILT SETUP
It is to set parameters for PTZ camera connected to DVR unit. DVR unit already includes all
protocols of well-known PTZ cameras like PELCO D type PTZ camera, and user just select MODEL
and set other parameters to control this PTZ cameras, using operation buttons on the front panel of
DVR. If PTZ camera whose protocol is not incorporated into this DVR unit, user must input protocol
of this PTZ camera by himself. Using USB device port, user can upgrade protocol for PTZ camera.
SELECT : ▲▼, CHANGE VALUE : ◀▶
COMMAND SETTING Å PTZ camera set
SPEED SETTING Å PTZ speed set
PAN/TILT SETUP
1) TCP/IP SETUP
TCP/IP function enables user to see live pictures and
recorded pictures via the internet. To use the TCP/IP
option, user must assign IP ADDRESS & GATEWAY
& SUBNETMASK into DVR in TCP/IP SETUP MENU.
Also, user must install the Remote viewer program to
PC from which user want to access to DVR unit Via IP
network. For detail procedure of Remote viewer
program installation, refer to CHAP. 6 Software
program.(Remote viewer software).
Move to sub-menu you want to change and press
[ENTER] button to set value. Press direction button to
move and [+] and [-] button to set value.
576000
8
1
NONE
SELECT : ▲▼, CHANGE VALUE : ◀▶
SPEED
LENGTH
STOP BIT
PARITY
RS-232C SETUP
01
PELCO-D
000
2400 BPS
1 MSEC
PAN/TILT STOP
0.7
FF 00 00 00
00 00 00 00
SELECT : ▲▼, CHANGE VALUE : ◀▶
CHANNEL
MODEL
PTZ ID
BAUDRATE
CMD DELAY
COMMAND
LENGTH
CODE
COMMAND SETTING
1) CHANNEL : Select channel
2) MODEL : Select camera model (protocol type)
3) PTZ ID : Select ID
4) BAUDRATE : Select data transmission speed
5) CMD DELAY : Select command delay time
00-0A-A2-00-00-00
192.168.001.160
08000
192.168.001.001
255.255.255.000
MANUAL
SELECT MENU : ▲▼, & [ENTER]
MAC ADDRESS
IP ADDRESS
IP PORT
GATEWAY
SUBNET MASK
DHCP SETUP
TCP/IP SETUP