ARM Electronics JDVR - Manual (Page 12)

B e s t p ic tu re q u a lity D V R
JP E G 2000 S tan d- alo ne D VR
11
5) VCR
6) Other External Device
Connect VCR or VIDEO Printer to VCR out on the rear panel of DVR.
SENSOR
SIREN
PAN/TILT
CAMERA
VGA
MONITOR
RS-232C : Control DVR through RS-232C port by using PC.
RS-485 : Control external device like PTZ Camera (Pin 1, 2 at Terminal Block).
RELAY Output : Relay Output (Pin 3 ~5 at Terminal Block).
SENSOR Input : SENSOR Input (Alarm connection)
ETHERNET : Connection to LAN, WAN, Internet.
VGA : Connection with VGA monitor(CRT,TFT LCD).
Select VGA in DISPLAY SETUP menu before connection to VGA monitor.
Setting VGA option board (For both CRT type PC monitor or TFT LCD monitor)
CHAP. 3 Installation