Archgard 45-DVFS28N-2 - Manual (Page 26)

45-DVFS28N-2
26
LOG PLACEMENT - Continued
LOG #5
Place log number 5 so the bottom left of the log sits on the burner directly behind
log number 4. Pull the log forward so it just touches log 4. Make sure the log is
set far enough to the right so as not to block any of the burner ports. Set the top
of the log so it rests against log number 3 as shown.
EMBERS
Place the embers on the burner and along the front edge of the burner surround. Make sure
to place the embers so as not to completely block burner ports. It is OK to place the embers
over the burner ports as long as they are not laying flat on the burner port preventing gas
from flowing out.