Amer Networks WAP33DC - Manual (Page 8)

WAP3xDC Series Wireless Indoor AP
Installation Manual Chapter 3 Installation
3.2 Installation Checklist
Check the following items before installing the AP:
Power on the AP and connect the Ethernet cable. Inspect the LED status to
make sure the AP is working normally.
Record AP’s MAC address and serial number (MAC address and serial
numbers are located on the back of the AP).
3.3 Installation Placement
Here are some tips for AP placement:
Cut back the obstacles (such as walls) between AP and the user terminal device
as much as possible.
Install APs far away from electrical devices that create RF noise such as the
microwave.
3.4 Installing the WAP3xDC
The installation methods of WAP33DC and WAP38DC are very similar. Both APs can be
installed using two methods:
• Wall hanging installation
• T-keel installation
3-2