Elation Professional MAGIC-260 User Manual
Page 14
M a g i c 2 6 0
14
Section 11: Choose Fixtures (Continue)
(3) You will get a momentary 3 second warning in the LCD that reads as follows:
THIS FIXTURE DOES NOT MATCH
RECORD & PATCH MEMORY ?
Followed by:
DO YOU WISH TO CONTINUE?
YES
NO
The reason for this message is the internal memory does not recogniz e the newly
selected fixture as being part of any Scenes or Shows currently stored in the console.
This warning appears each time a fixture is changed in the “Choose Fixtures” menu
option. You would only ever press DATA wheel #2, for NO , if you changed your fixture
setting accidentally. Selecting “NO” would cancel the change and your previously set
fixture would not change.
(4) Press DATA wheel #1 to select “YES”. DONE will momentarily appear in the display to confirm that the
newly selected fixture has been set.
(5) To choose your next fixture, turn DATA wheel #1, below “FIXTURE 01” clockwise, to access Fixture
#2. Your display should read as follows:
Fixture
Type
02
NO FIXTURE
(6) Repeat steps 3, 4 & 5 to choose the remainder of your fixtures. When finished, press the “MENU”
button two times to exit. Magic 260’s display should return to the home screen.